Gemini 933MHW User Manual


DesignedandmanufacturedbyGEMINITECHNOLOGIESsrl‐ViaL.Galvani,12
–
21020BodioLomnago(VA)
–
Italy
Tel.+390332943211–Fax+390332948080–www.gemini‐alarm.com
ISO9001CERTIFIEDCOMPANY

AC2955Rev.0001/2018

1/4








1.0 - INTRODUCTORY NOTE
2.0 - REMOTE CONTROL 738W DESCRIPTION AND BATTERY REPLACEMENT
3.0 - OPERATING INSTRUCTIONS
3.1 - Complete system arming
3.2 - System arming with sensors exclusion
3.3 - Passive arming
3.4 - Arming delay
3.5 - System armed
3.6 - Alarm, inhibit time between alarms and alarm cycles
3.7 - System disarming
3.8 - Alarm memory
4.0 - LEARNING & DELETING DEVICES
4.1 - Learning new devices
4.2 - Deleting programmed devices
5.0 - TECHNICAL SPECIFICATIONS
6.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT DIRECTIVE (WEEE)
Dear customer, thank you for choosing this GEMINI product designed and manufactured in Italy specifically for recreational vehicles.This new generation CAN
BUS alarm system has been implemented with a 2.45GHz transceiver and ZigBee wireless technology with anti-jamming reliability.
Please read the present manual carefully to familiarize yourself fully with the operation of your alarm system and do keep it for future reference.
If the right connections have been made, the vehicle doors will lock/unlock when pressing the arming/disarming buttons.
If the LED light blinks 3 times when pressing any button, the battery is weak and must be replaced as follows:
Use only 23AE batteries.
ATTENTION: Risk of explosion if battery is replaced by an incorrect type.
Discard used batteries properly in special dedicated containers.
ALARM KIT 933MHW
U
K
1.0 - INTRODUCTORY NOTE
2.0 - REMOTE CONTROL 738W DESCRIPTION AND BATTERY REPLACEMENT
BUTTON 1:
TOTAL SYSTEM
ARMING
(
and door lock
)
BUTTON 3:
PARTIAL ARMING
(
door lock & sensor exclusion
)
BUTTON 2:
SYSTEM DISARMING
(and door unlock)

Gemini 933MHW Specifications

General

Brand	Gemini
Model	933MHW
Category	Security System
Language	English