4
MPA-2400
WEATHER RESISTANT LED TROLLEY SPEAKER
ENGLISH //
CONNECTION DIAGRAM
TRANSPORT CONTROLS
The buttons located in the top row have dual
functions depending on how long you hold
them.
< Button – Short press plays the last track in
your song list. Long press is volume down.
> Button – Short press plays the next rack in
your song list. Long press is volume up.
Play/Pause Button – Short press toggles
between playing or pausing the current track.
A long press puts the unit into “Folder Mode”,
allowing you to navigate into and out of
folders using the < and > buttons.
Source Button – Press the Source button to
toggle between different available sources.
The order is USB (if present) / Bluetooth /
FM / AUX (Line In).
Bluetooth Button – Pressing this button
switches immediately into BLUETOOTH
mode, allowing you to stream music
wirelessly from your portable device (like a
smartphone or tablet).
Lights Button – This button turns the MPS-
2400’s integrated dynamic light show on or
off.
BLUETOOTH PAIRING
To being pairing, switch the MPA-2400 into
BLUETOOTH Mode.
If there is no device paired to the MPA-2400,
it will begin searching for a phone to pair
with. You will see a blinking BT indicator on the
bottom left of the MPA-2400 display to show it’s
ready to pair.
Open the Bluetooth settings on your mobile
device and look for the MPA-2400 in the list of
available devices. Tap the device name to begin
pairing.
Once pairing is complete, you will hear a
notication on the MPA-2400, and the BT
indicator will light solid on the MPA-2400
display. You are now ready to stream music.
(If the BT indicator on the MPA-2400 display
is lit solid, it is connected to another Bluetooth
device. If you’re having a problem pairing with
the MPA-2400, make sure to turn off Bluetooth
on any devices that may be connected to it.)
DSP EQ PRESETS
To make it easy for you to tailor the sound, the
MPA-2400 is equipped with 6 EQ presets.
These 6 presets cover a wide variety of musical
genres from Pop to Jazz. Please don’t feel
limited to only selecting the preset that matches
the genre you’re currently playing. You may nd
that using a different preset is more pleasing.
Pressing the NORMAL EQ button returns the
audio to its original sound.
DYNAMIC DSP EQ
You may decide that you would like a little more
control over the sound of your music. You can
change the bass and treble sound by pressing
the VOLUME knob. Pressing it once will allow
you to adjust the bass (and a “b” will appear on
screen”. Pressing it again will give you control of
the treble (and will show a “t” on screen). Finally,
pressing it once more will return you to volume
control (indicated on screen with a “v”).
DEVICE CHARGING
The MPA-2400 comes equipped with a USB port
that can be used to charge external devices, like
smartphones.
Using your manufacturer-supplied USB charging
cable, connect to the USB port on the MPA-
2400 and your portable device. You should
see a charging indicator appear on your mobile
To Next Page
Loading...
Need help?
General
