Generac Power Systems Mobile Power MMG185 User Manual

Manufactured by Magnum Power ProductsLLC. a wholly owned subsidiary of Generac Power Systems,Inc.
Phone: 800-926-9768 Fax: 920-361-2214 www.m-p-llc.com
Page 1 of 4
4/12
Mobile Generator – MMG185 Specifications
ENGINE
 John Deere
®
PE6068HF485 - turbocharged, diesel engine
o Prime - 258 hp @ 1800 rpm
o Standby - 284 hp @ 1800 rpm
o 6 cylinder
o 6.8 L displacement
o Tier III approved
 Steel, single wall fuel tank
o 342 gal. capacity
o 25 hr. run time – full load
o Fuel tank built into skid of generator set
 Fuel consumption at prime:
o 100% - 12.3 gph (57.5 Lph)
o 75% - 9.5 gph (43.2 Lph)
o 50% - 6.6 gph (28.8 Lph)
 Cooling system capable of operating at 120°F ambient
 Low coolant shutdown
 Radiator and oil drains plumbed to exterior
 Rubber vibration dampers isolate engine/generator from frame
 Disposable air filter - paper element
 Air filter restriction indicator mounted on control panel
 60 Hz engine/generator
 Electronic isochronous governing
GENERATOR
 Marathon Electric
®
o Brushless
o 4 pole
o Class H insulation
 Voltage regulation +/- 1% with Marathon SE350 Voltage Regulator
SYSTEM OUTPUT
 3 Position voltage selector switch:
o Three phase – 120 / 208V Low Wye
o Three phase – 277 / 480V High Wye
o Single phase – 120 / 240V Zig Zag
 177 kW / 221 kVA – standby, three phase
 162 kW / 202 kVA – prime, three phase
 151 kW / 151 kVA – standby, single phase
 137 kW / 137 kVA – prime, single phase
SYSTEM CONTROLS
 Microprocessor-based controller
o Backlit, 128x64 pixel resolution display
o -40°F to 185°F operating temperature range
o Thermostatically controlled LCD heater
185
MOBILEPOWER
MOBILEPOWER

Generac Power Systems Mobile Power MMG185 Specifications

General

Brand	Generac Power Systems
Model	Mobile Power MMG185
Category	Portable Generator
Language	English