4
FEATURES AND SPECIFICATIONS
• Measurement range/accuracy/resolution:
50 ft./±1/4 in./1/16 in.
• Measurement unit: feet + fractional inches
• Display: 5-digit LCD measuring 1 x 1/2 in.,
with 1/4 in. high digits
• Laser automatically powers off after 15 seconds
(for safety reasons)
• Display automatically powers off after 60 seconds
(to conserve battery charge)
• Battery charge indicator
• Power source: Two “AAA” Alkaline batteries (included)
• Typical battery life: >3,000 measurements
• Laser output: <1mW (Class II) @ wavelength of
620 to 690 nm
• Operating temperature: 32º to 104ºF
• Storage temperature: 14º to 140ºF
• Dimensions: 3.187 x 1.313 x 0.938 in.
• Weight: 0.15 lbs.
• 1-year limited warranty
WARRANTY INFORMATION
General warrants its instruments and accessories, and
digital tools products against defects in material or
workmanship for one year from the date of purchase
unless otherwise stated on the packaging, user’s manual,
and/or marketing materials. General also warrants its non-
digital tools products against defects in material or
workmanship on a limited lifetime term.
General will replace or repair the defective unit, at its
option, subject to verification of the defect.
This warranty does not apply to defects resulting from
abuse, neglect, accident, unauthorized repair, alteration,
or unreasonable use of the product. It also does not cover
products purchased from unauthorized distributors. A proof
of purchase must accompany each warranty claim.
Any implied warranties arising from the sale of a General
product, including but not limited to implied warranties of
merchantability and fitness for a particular purpose, are
limited to the above. General shall not be liable for loss of
use of the product or other incidental or consequential
damages, expenses, or economic loss, or for any claim of
such damage, expenses, or economic loss. State laws vary.
The above limitations or exclusions may not apply to you.
For more details or to file a warranty claim, contact
General Tools & Instruments Technical Support at
techsupport@generatools.com.
RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a reliable
product of superior quality. However, in the event your
instrument requires repair, please contact our Customer
Service to obtain an RGA (Return Goods Authorization)
number before forwarding the unit via prepaid freight to
the attention of our Service Center at this address:
General Tools & Instruments
75 Seaview Drive
Secaucus, NJ 07094
212-431-6100
To Previous Page
Loading...
Need help?
General
