English
20V MAX Lithium-ion Circular Saw
Operator’s Manual GLCS2055A
• Do not force the power tool.
•
Use the correct power tool for the job.
•
Do not use tool if switch does not turn it on or off.
.
•
Turn power tool off, and disconnect the plug
.
.
•
Store idle tool out of reach of children and other inexperienced persons.
•
Maintain power tools with care.
•
Use recommended accessories.
•
Keep cutting tools sharp and clean.
.
•
Feed the workpiece in the correct direction and speed.
•
Never leave the tool running unattended, turn the power off.
BATTERY TOOL USE AND CARE
Ensure the trigger switch is in the off position before inserting battery pack.
Recharge only with the charger specified by the manufacturer.
Use battery tools only with specified battery pack
Avoid storing battery pack in a container with other metal objects such as
nails, coins, clips, keys, screws, or other small metal objects that can make
a connection from one terminal to another
Under abusive conditions, liquid may be ejected from the batter
Battery tools do not need to be plugged into an electrical outlet
WARNING:USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR
OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST
AND ASBESTOS. Direct particles away from face and body. Always operate tool in a
well-ventilated area and provide for proper dust removal. Use dust collection system
wherever possible. Exposure to the dust may cause serious and permanent respiratory
or other injury, including silicosis (a serious lung disease), cancer, and death. Avoid
breathing the dust, and avoid prolonged contact with the dust. Allowing dust to get into
your mouth or eyes, or lay on your skin may promote absorption of harmful material.
Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for
dust exposure, and wash exposed areas with soap and water.
4
To Next Page
Loading...
Need help?
General
