EasyManuals Logo

Gigabyte GA-945GCM-S2 User Manual

Gigabyte GA-945GCM-S2
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
BIOS Setup- 35 -
English
HDD S.M.A.R.T. Capability
This feature allows your hard disk to report read/write errors and to issue warnings when third-
party hardware monitor utility is installed.
Enabled Enable HDD S.M.A.R.T. capability.
Disabled Disable HDD S.M.A.R.T. capability. (Default value)
CPU Hyper-Threading
(Note)
Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)
Disabled Disable CPU Hyper Threading.
Limit CPUID Max. to 3
(Note)
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disable CPUID Limit for windows XP. (Default value)
No-Execute Memory Protect
(Note)
Enabled Enable No-Execute Memory Protect function. (Default value)
Disabled Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E)
(Note)
Enabled Enable CPU Enhanced Halt (C1E) function. (Default value)
Disabled Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2)
(Note)
Enabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disabled Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function
(Note)
Enabled Enable CPU EIST function. (Default value)
Disabled Disable EIST function.
Virtualization Technology
(Note)
Enabled Enable Virtualization technology function. (Default value)
Disabled Disable this function.
On-Chip Frame Buffer Size
1MB Set on-chip frame buffer size to 1 MB.
8MB Set on-chip frame buffer size to 8 MB. (Default value)
(Note) This item will show up when you install a processor which supports this function.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gigabyte GA-945GCM-S2 and is the answer not in the manual?

Gigabyte GA-945GCM-S2 Specifications

General IconGeneral
Number of memory slots2
Maximum internal memory2 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
Processor system buses supported533 MHz
S/PDIF out connectorYes
Number of SATA connectors4
Number of Parallel ATA connectors1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power source typeATX
Audio output channels7.1 channels
Motherboard form factormicro ATX
LAN controllerMarvell 88E8001
Networking featuresGigabit Ethernet
Weight and Dimensions IconWeight and Dimensions
Depth244 mm
Width220 mm

Related product manuals