EasyManuals Logo

Gigabyte GA-EP45-DS3 User Manual

Gigabyte GA-EP45-DS3
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
GA-EP45-DS3R/DS3 Motherboard - 96 -
Step 3:
When Setup correctly recognizes the Intel ICH10R SATA RAID/AHCI driver in the floppy disk, a
controller menu similar to Figure 3 below will appear. Use the up or down arrow key to select one of
the items displayed and press <Enter>. If you set the SATA RAID/AHCI Mode item in BIOS Setup to
RAID mode, select Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller. (Select Intel(R) ICH10R
SATA AHCI Controller for AHCI mode.)
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA RAID/AHCI driver again from the motherboard driver disk.
Figure 3
Figure 4
When the screen as shown below appears, press <Enter> to continue the driver installation from
the floppy disk. The driver installation will be finished in about one minute.
Windows Setup
S=Specify Additional Device ENTER=Continue F3=Exit
Setup will load support for the following mass storage device(s):
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
Windows Setup
ENTER=Select F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ICH7R/DH SATA AHCI Controller
Intel(R) ICH7M/MDH SATA AHCI Controller
Intel(R) ICH8R/DH/DO SATA AHCI Controller
Intel(R) ICH8M-E/M SATA AHCI Controller
Intel(R) ICH9R/DO/DH SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH10R SATA AHCI Controller
Intel(R) ESB2 SATA RAID Controller
Intel(R) ICH7R/DH SATA RAID Controller
Intel(R) ICH7MDH SATA RAID Controller
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gigabyte GA-EP45-DS3 and is the answer not in the manual?

Gigabyte GA-EP45-DS3 Specifications

General IconGeneral
Number of memory slots4
Maximum internal memory16 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
USB 2.0 connectors2
Power fan connectorYes
Number of SATA connectors6
USB 2.0 ports quantity8
VGA (D-Sub) ports quantity0
BIOS typeAWARD
BIOS memory size64 Mbit
Audio chipRealtek ALC889A
Audio output channels7.1 channels
Motherboard form factorATX
Compatible operating systemsWindows Vista/XP
LAN controllerRealtek RTL8111C
Networking features10/100/1000 Mbit

Related product manuals