- 37 - System Hardware Installation
3-10 Replacing the Fan Assembly
Follow these instructions to replace the fan assembly:
1. Lift up the fan assembly from the chassis.
2. Reverse the previous steps to install the replacement fan assembly.
• Voltages can be present within the server whenever an AC power source is connected. This
voltage is present even when the main power switch is in the off position. Ensure that the
system is powered-down and all power sources have been disconnected from the server
prior to replacing a system fan.
Failure to observe these warnings could result in personal injury or damage to equipment.
To Next Page
Loading...
Need help?
General