globalindustrial.ca
User's manual Manual del usuario Manuel de l'utilisateur
Customer Service
US: 1-800-645-2986
Servicio de atención al Cliente
US: 1-800-645-2986
Service à la clientèle
Canada: 888-645-2986
1
WARNING:
Please read entire manual carefully prior to assembly and use. If there are any
additional questions, contact Global Industrial Customer Service at 1-800-645-2986 or visit
www.globalindustrial.com
• To reduce the risk of fire, only use commercially available floor cleaners and waxes
intended for this machine’s applications.
• To reduce the risk of injury from moving parts and electric shock, unplug before servicing.
• This machine is compatible with Global Industrial pads and brushes only, (see accessory
list below for replacement part information).
• Never carry scrubber by the cord, or yank the cord to disconnect the polisher from an outlet.
Instead grasp the plug, and pull to disconnect.
• Keep cord away from heated surfaces. Do not pull cord around sharp edges or corners. Do
not close door on the cord.
• Do not touch moving parts. Do not use outdoors.
• Do not leave appliance unattended when plugged in. Unplug from outlet when not in use,
and before servicing.
• Do not handle plug or appliance with wet hands.
• Follow all labels, and marking instructions.
• Do not allow product to be used by children. Close attention is needed when used
near children.
• Do not use with damaged cord, or plug. If appliance is not working as it should, has been
dropped, damaged, or submerged in water, take it to an authorized service center.
• Do not use with or near flammable liquids.
• Do not store appliance near hot ovens or heating appliances.
• Use only as described in this manual. Use only Global Industrial recommended attachments.
Do not use for any purpose other than described in this user’s guide.
• Make sure the appliance is connected to the correct voltage (listed on the rating label).
• Do not submerge the appliance in water or other liquid. Do not place or store the appliance
where it can fall, or be pulled into any liquid. Do not wash the machine.
• If the machine is in need of repair, do not attempt to repair it yourself. Take the unit to an
authorized service center.
• If using the machine to polish floor wax, make sure the wax is completely dry
before polishing.
• The polisher is equipped with a thermal limiting device to protect the motor from excessive
temperature. If the polisher suddenly stops operating, unplug the unit, and allow it to cool.
If the appliance is left plugged in, it could start unexpectedly when the motor cools.
Mini Floor Scrubber
010819
MODEL DESCRIPTION
641376 Replacement Scrub Brushes, Pack of 2
641377 Replacement Microfiber Pads, Pack of 2
641378 Replacement Carpet Bonnets, Pack of 2
641379 Replacement Felt Pads, Pack of 2
641380 Replacement Scrubbing Pads, Pack of 2
TECHNICAL
INFORMATION
Voltage: 120,
Frequency: 60 HZ
Power Requirement:
180 Watts
Mini Floor Scrubber
with Floor Pads, 11"
Cleaning Path
Model
641376
Model
641377
Model
641378
Model
641380
Model
641379
REPLACEMENT ACCESSORIES
Model
641375
To Next Page
General