1. Loosen the screw of the clamp with the Allen key provided.
2. Insert the handlebar into the stem of the fork while paying attention to the position of
the base. The vertical part of the fork should be at the front and the wide part of the
mudguard should be at the back.
1 or 2 times to start tightening WITHOUT FORCING THE SCREW and WITHOUT
BLOCKING IT (A). Repeat the process with the upper screw also making sure to NOT
FORCE or BLOCK IT (B).
5. The tightening of the screws should be progressive and successive(between 5 to 10
6. Those who do not have enough strength to tighten the screws with the Allen key
After each use make sure that the screws are tightly in place so that the handlebar
doesn’t detach itself.
Adjust the height
Open the quick lock and pull the steering column until the bullet into hole then tighten
3 Positions :
• Low position: 78.5 cm
• High position: 88.5 cm
TOO
•
FIX UP
MY
10 REASONS TO ADOPT
1
INNOVATIVE DESIGN
Robustness and comfort for intensive use.
2
USER COMFORT
High density non-slip EVA grip.
3
RESISTANCE
Non-folding structure therefore more resistant and adapted to daily use
by children who only rarely fold up their scooter.
4
PERFORMANCE AND LONGEVITY
5
QUALITY OF THE ROLLING PARTS
121 mm front wheel and rear wheel in transparent HQ (high quality)
on 608 ZZ ABEC 5 ball bearings.
6
UPGRADABLE AND PRACTICAL
Height-adjustable T-bar handlebar (precise guidance) which adapts to
.
7
QUALITY OF THE EQUIPMENT
8
ERGONOMICS OF THE HANDLES
more resistance.
9
SAFETY
Long and covered composite rear brake which allows better braking
while preserving the back wheels.
10
QUALITY OF THE EQUIPMENT
7
ENGLISH
To Next Page
Loading...
Need help?
General