The LIGHT-A-LIFE light is compatible with all GOAL
ZERO power packs in addition to 12V outlets.
1. Be sure to ACTIVATE YOUR WARRANTY at www.GOALZERO.com/warranty
2. Plug the cord into the 12V input on any GOAL ZERO power pack.
3. Make sure the LIGHT-A-LIFE and the power pack are switched to the “on” position.
4. Hang the device to accommodate lighting specifications.
5. Chain up to 8 LIGHT-A-LIFE’s from the connecting port on top of each light.
Get to Know Your Gear
Technical specs
Comes With
How to Use Your Gear
Getting Started
LIGHT IT
HANG IT
The LIGHT-A-LIFE uses a 3 Watt LED
bulb to generate 270 lumens of light.
With a 9’ extender cord and patented carabiner, you
can hook the LIGHT-A-LIFE to most anything.
Input
General
Weight .7 lbs (.31 kg)
Dimensions 2x1.6x4 in (5x4x10.1 cm)
Warranty 12 months
Certifications FCC and CE
Operating temp. 0-120ºF (-17-48ºC)
Light 3W total, bulb of white LEDs
Output
Plug it in
Attach your LIGHT-A-LIFE to a 12V power source
(GOAL ZERO power pack recommended.)
Daisy chain it
Chain up to 8 LIGHT-A-LIFEs together for more light.
Turn it on
Flip the switch to the “on” position for light.
12V male car adapter
9 foot cord and patented carabiner
PLUG IT
12V port 6mm or male car adapter
12V, 0.25A max (3W)
Usage
Hang and chain up to nine LIGHT-A-LIFEs.
3 WATT LED LIGHT
To Next Page
Need help?
General
