Goodwe GW10K-DT Installation Guide

5. To check the exact network status send the following message to mobile number of the device
SMS Command= *2222#<Stat.gsm>
IMEI
IMEI No. of the data logger (Device Key)
NW
Network
SIGN
Signal Strength out of 31
GPRS
CONT- connected , NC- not connected
PIP
Connected to TrackSo Server or not
CONT- connected, NC- not connected
LOG
no. of data points stored in devices incase of no interet
6. If the GSM light starts flashing 5 times then Login to www.trackso.in with your Username/Password.
7. Click on ‘Units’ from the menu bar. You will be able to view your installed unit in the table as shown below.
8. Check if the Status becomes Receiveing for the relevant Unit.

Goodwe GW10K-DT Specifications

General

Brand	Goodwe
Model	GW10K-DT
Category	Inverter
Language	English