Before folding the scooter, make sure that the scooter is powered off.
Folding: Ensure the electric scooter is powered off, hold the tiller and
pull out the spring pin on the right folding panel then rotate the spring
pin counterclockwise. Insert the hook on the tiller into the loop on the
rear fender buckle. You may hear a click which indicates that you were
successful in folding and locking the scooter.
Unfolding: Press the rear fender and pull the tiller up to unfold the electric
scooter, the spring pin will insert itself in place within the folding lever to
lock the folding mechanism.
Putting Your Scooter
Away/Folding
1 2
To Next Page
Loading...
Need help?
General
