Tightening the Tiller: If you notice that the tiller is loose or wiggles while
riding, you can tighten the screws. Open the plastic cover, and use the
Allen wrench to tighten the screws as shown in the gure below.
Adjusting the Disc Brake: If the disc brake is too tight, use the 4MM
Allen wrench to loosen the screws counterclockwise. Pull the brake wire
to extend the brake wire and retighten the screws. If the disc brake is too
loose, loosen the screws and pull the brake wire to extend the brake wire
and retighten the screws.
To Next Page
Loading...
Need help?
General
