Graco X5 - User Manual

3A3208B
EN
Not approved for use in explosive atmospheres or hazardous locations.
For portable airless spraying of architectural paints and coatings.
Important Safety Instructions
Read all warnings and instructions in this manual, related manuals, and on the unit.
Be familiar with the controls and the proper usage of the equipment. Save these
instructions.
FIRE AND EXPLOSION HAZARD
X5/X7 Models:
•
Use only non-flammable or water-based materials, or non-flammable paint thinners. Do not use
materials having flash points lower than 100° F (38° C). This includes, but is not limited to, acetone,
xylene, toluene, or naphtha. For more information about your material, request Safety Data Sheet
(SDS) from the supplier.
• Spraying flammable or combustible materials in a factory or fixed location must comply with NFPA
33 and OSHA 1910.94(c) requirements in the USA and with all similar local regulations in other
countries.

Graco X5 Specifications

General

Brand	Graco
Model	X5
Category	Paint Sprayer
Language	English

Summary

Important Safety Instructions

Fire and Explosion Hazard

Warnings regarding flammable fumes and materials, static electricity, and ignition sources.

General Safety Instructions

Read warnings, be familiar with controls, and save instructions for proper usage.

Warnings and Safety Precautions

Electrical Safety and Grounding

Ensuring proper grounding to reduce electric shock risk from electrical equipment.

Fire and Explosion Hazards

Preventing fire and explosion from flammable fumes and combustible materials.

Personal Safety Hazards

Covers skin injection, equipment misuse, and toxic fluid/fume hazards.

Personal Protective Equipment

Recommends protective gear to prevent injury from hazardous materials.

Setup Procedures

Assemble Your Sprayer

Step-by-step instructions for assembling the sprayer components.

Start Up Procedures

Pressure Relief Procedure

Essential steps to safely relieve pressure before servicing or stopping the sprayer.

Flush Storage Fluid

Fill Pump and Hose

How to Spray

Spray Tip Installation and Adjustment

Spraying Techniques and Pattern

Clearing Tip Clogs

Cleanup Procedures

Cleaning Procedure with a Pail

Steps for cleaning the sprayer after use using a pail and fluid.

Power Flush Adapter Cleanup

Storage

Short Term Storage

Long Term Storage

Maintenance and Repair

Pump Removal and Installation

Detailed steps for removing and installing the sprayer pump assembly.

Valve and Tool Service

Procedures for inlet valve removal and use of ProXChange removal tools.

Hose and Tip Maintenance

Troubleshooting Guide

Motor and Electrical Issues

Diagnosing problems related to the motor not running or electrical connections.

Priming, Pressure, and Seized Pump Issues

Spray Pattern and Output Issues