Energy Recovery Ventilation System
2
Be sure to use the
exclusive accessory and
part to prevent the water
leakage, electric shock
and fire accidents.
Wire size of power cord
should be large enough.
The damaged power
cord and connection
wire should be replaced
by exclusive cable.
After connecting the
power cord, please fix
the electric box cover
properly in order to avoid
accident.
Do not expose the unit
to the moist or corrosive
circumstances.
Never start up or shut off
the unit by means of
directly plug or unplug
the power cord.
Please firstly connect
the wired controller
before energization,
otherwise wired
controller cannot be
used.
Do not allow children
operate this unit.
Do not operate this unit
with wet hands.
Never spray or flush
water towards unit;
Otherwise, malfunction
or electric shock may
happen.
Once installation is
finished, please check if
the connection of power
cord and
communication line are
correct to avoid electric
shock, short circuit, fire
hazard and other
accidents.
Turn off the unit or cut off
the power supply before
cleaning the unit,
otherwise electric shock
Do not insert fingers or
objects into air
outlet/inlet grille.
To Next Page
Loading...
Need help?
General
