D.C. Inverter Multi VRF Modular
26
4.2.5.7 Fitting pipe between indoor unit and manifold
Manifold should be matched with fitting pipe of indoor unit.
Fig.30
Rated capacity of indoor unit C(kW)
Pipe between indoor branch and IDU
4.3 Installation of the Connection Pipe
4.3.1 Precautions when installing the connection pipe
(1) Conform to the following principles during piping connection:Connection pipeline should
be as short as possible.The height difference between indoor and outdoor units should
be as short as possible.Keep number of bends as little as possible. The radius of
curvature should be as large as possible.