30
Technical Information
Service Manual
COOL DRY FAN
HEAT
*
OFF
This button is used for setting Fan Speed in the sequence that goes from AUTO, ,
, to , then back to Auto.
Auto
Low speed Medium speed High speed
This function indicates that moisture on evaporator of indoor unit will be blowed after the unit is stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF button indoor fan will continue running for a
few minutes. at low speed. In this period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF button, the complete unit will be off directly.
X-FAN function Hold fan speed button for 2s in COOL or DRY mode, the icon “ ” is displayed and the indoor fan will continue
operation for a few minutes in order to dry the indoor unit even though you have turned off the unit. After energization,
X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
●
●
●
Note:
● It’s Low fan speed under Dry mode.
● Under AUTO speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
To Next Page
Loading...
Need help?
General
