Grifco eDrive +2.0 Supplementary Installation Manual

2
SAFETY INSTRUCTIONS
Mechanical
Electrical
When you see these Safety Symbols and Signal Words on the following pages,
they will alert you to the possibility of serious injury or death if you do not
comply with the warnings that accompany them. The hazard may come from
something mechanical or from electric shock.
When you see this Signal Word on the following pages, it will alert you to the
possibility of damage to your commercial door and/or the commercial door
opener if you do not comply with the cautionary statements that accompany it.
WARNING: The Grifco eDrive +2.0 User Manual contains important safety
information and must be read prior to attempting installation of this opener.
SYSTEM OVERVIEW
WARNING
WARNING
CAUTION
Opener, includes: motor,
gear box, APE and drive
sprocket.
Mounting
bracket
Hand chain mechanism
(Supplied chain not
shown)
APE Cable and
Motor Power cable
(Conduit not shown
– not supplied)
Wall Mount kit,
including Expansion
Board
C10A Controller
Existing Control
Box on site
NOTE:
This Grifco kit allows the retrofit conversion
of non-Grifco motors on vertical lift cool
room door configurations. The included
mounting plate requires a specific
counterweight idler arrangement to allow
chain drive as described. The existing
control box will require conversion to
house the new Grifco control system.
Although every attempt is made to ensure
this kit is flexible to differing installation
conditions, some site variations may exist
that require an alternate configuration
(Left Hand installation shown)

Grifco eDrive +2.0 Specifications

General

Brand	Grifco
Model	eDrive +2.0
Category	Garage Door Opener
Language	English