1 2 3
4
5
6
7
8
11
12
10
9
MIN 2500-6000TL-X Quick Guide
8-10mm
1
2
3
4
5
2.3 Communication module installation
Inverter side
Inverter side
Inverter side
Inverter side
▲Up
UninstallInstall
3.
Electrical connection
Please prepare the cable before connecting as follows.
1
2
3
4
Cable name
PV input wire
Type
Two or three polychromatic
multi-core copper wires
PV wire（such as PV1-F)
RS485
Recommend model
6mm²
6mm²
4mm² - 6mm²
4mm² - 6mm²
4mm² - 6mm²
/
No.
Communication
wire
AC output wire
grounding wire
Protective
Single multi-core
yellow-green wire
1.Please make sure all switches are in “OFF”
position before wiring. For personal safety,
please do not operate with electricity.
2.If the diameter of the cable does not match
the terminal, or the cable is aluminum wire,
please contact our after-sales personnel.
Note:
3.1 Grounding
3.2 AC output connection
3.3 DC connection
3.3.1 PV input terminal installation
Positive metal terminal
Positive metal terminal
Negative metal terminal
Negative metal terminal
Negative metal terminal
Please make sure the cable can not be
pulled out after pressing.
Pull the PV cable make sure there
is no loos or shaking.
Make sure the cable polarity is
correct and voltage is less than
550V.
System overview
2.1 Installation requirements
2.2 Wall mounting
Note：
1.When drilling holes in the wall, avoid water and electricity pipes, otherwise it may cause danger.
1.
2.
(1)Front panel
(2)Touch button
(3)OLED screen
(4)LED indicator
(10)DRM port
(5)Heat sink
(6)DC switch
(8)PV terminal
(11)RS485 port
(9)USB port
(7)Vent valve
(12)AC terminal
1.This document is for quick installation guidance only, please refer to User Manual for more details.
2.Growatt shall not be liable for any damage resulting from unproper installation.
Note：
Overview
Installation
≥300mm
≥300
mm
≥300mm
≥500mm
≥300mm
250
18
Type 1
Type 2
Type 3
179
161
429
375
319 28
350
137.5
To Next Page
Need help?
General
Weight and Dimensions
