Need help?Do you have a question about the Grundfos UPMXL 25-125 130 and is the answer not in the manual?
General| Model | UPMXL 25-125 130 |
|---|---|
| Power Supply | 230 V |
| Port-to-port length | 130 mm |
| Frequency | 50/60 Hz |
| Fluid Temperature Range | from -10 to +110 °C |
| Material | Cast iron, Stainless steel |
| Type | Circulator pump |
Maximum relative humidity, IP rating, and DHW parameters.
Specifies the minimum/maximum operating temperatures and maximum pressure.
Details the minimum/maximum operating temperatures and maximum noise level.
Illustrates the correct mounting direction and alignment using a level.
Shows correct and incorrect methods for connecting the pump.
Demonstrates correct and incorrect ways to attach the pump to pipework.
Details valve operation and final tightening procedures during installation.
Demonstrates the concluding steps (5 and 6) of the pump installation process.
Diagram and specifications for connecting external control systems.
Table detailing PWM, LIN, and MODbus contacts and cable colours.
Diagram for connecting internally controlled systems.
Illustrates AUTO mode display, controls, and initial startup procedures.
Explains how to set PP and CP parameters via the control interface.
Charts showing head vs. flow rate for UPMM, UPML, and UPMXL models.
Charts showing head vs. flow rate for SOLAR PML and UPMXXL models.
To Next Page
