Commercial Air Conditioner
Self-diagnostic function
In the course of operation, if the failure occurs, the failure code will display on the wired controller
or on the operation panel. Then according to the failure code chart, you can eliminate the failure soon.
Central control function, if connected with a detector and a central controller
That is convenient for building management.
Adjustable heating temperature compensation
In heating mode, the temperature compensation can be adjusted by the remote controller. If you do not
want the compensation, you can set the compensation as 0 degree.
Software for diagnostic installation
After installation, you can use file "X-MULTI Setup Assistant " to know the installation is OK or
not, if system has error, software will give you trouble shooting.
-5-
To Next Page
Loading...
Need help?
General