10
GLASS
This cycle is for lightly soiled glassware.
RINSE
This cycle is for rinsing dishes or glasses. This cycle is only a rinse that keeps
food from drying on your dishes and reduces odor buildup in your dishwasher
until you are ready to wash a full load. Do not use detergent.
b OPTIONS
Press the Options button to toggle among the options. The light next to the
option illuminates to indicate the selected cycle.
NOTE: The Clean indicator light illuminates to indicate the end of the wash cycle.
SANITIZE
WARNING: Only sanitizing cycles have been designed to meet the
requirements of 6 for soil removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all cycles on a certified
machine have passed the sanitization performance test.
The sanitize option sanitizes dishes and glassware in accordance with NSF
residential dishwashers are not intended for use in licensed food establishments.
This option is available for all cycles except except Glass and Rinse.
When the Sanitize option is selected, the water temperature will reach 158°F
(70°C) maximum.
The Sanitized indicator light illuminates to indicate when the Wash cycle with
unlocked for 30 seconds.
NOTE: It is possible that the water will not reach 158°F (70°C) in the Sanitize
mode, if the temperature of the incoming hot water is not the minimum
requirement of 120°F (49°C).
HI TEMP
This option is available for all cycles except except Glass and Rinse.
When the Hi Temp option is selected, the water temperature will be maintained
at 140°F (60°C) maximum.
HEATED DRY
This option is available for all cycles except Rinse.
When the Heated Dry option is selected, the heater will work during the drying
process.
To Next Page
Loading...
Need help?
General
