Haier HSU09VHGDB-W User Manual

CONTROLLER FEATURES & SETTINGS PAGE 3
ENGLISH
HEAT:
2. Leftandrightairowadjustment(manual)
Manually move the vertical blade sets on the air conditioner
toadjustleftandrightdirectionreferringtothegurebelow.
'
Cautions:
• Turntheunitopriortoopeningthehorizontallouverand
adjustingtheverticalbladesbyhand.
• Whenhumiditylevelsarehigh,condensatewatermayoc-
curattheairoutletifallverticallouversareadjustedtoleft
or right.
• Itisadvisablenottokeepthehorizontallouverinthe
downwardpositionforanextendedperiodoftimeinCOOL
orDRYmode,otherwisecondensatewatermayformon
the louver.
Note:
When turning the unit on, the remote control will automatically
return the louver to the previous set swing position. When turn-
ing the unit o, the louver will rotate to the full open position
prior to closing.
10
Timer Button
On-OOperation
1. Start the unit and select the desired operating mode.
2. Press the TIMER
7,0(5
button to change to TIMER mode.
EverytimetheTIMERbuttonispressed,thedisplaychanges
asfollows:
Remote control display:
BLANK
TIMER ON TIMER OFF TIMER ON-OFF
TIMER OFF-ON
0.5h
0.5h 0.5h
0.5h
SelectthedesiredTIMERmode(TIMERONorTIMEROFFor
TIMERON-OFF).The“ON”or“OFF”iconwillash.
3. Press the
/ buttons to set the time.
- Pressing this button increases the time in 0.5 hour
incrementsbetweenhours0and12,and1hourincrements
fortimesbetweenhours12and24.
- Pressing this button decreases the time in 0.5 hour
incrementsbetweenhours0and12,and1hourincrements
fortimesbetweenhours12and24.
Theonorotimecanbeadjustedupto24hours.
4. Conrmtimersetting
Afteradjustingthetime,presstheCONFIRM/CANCEL
&21),50
&$1&(/
buttonandconrmthetimeONorOFFiconstopsashing
and remains displayed.
5. Cancel timer setting
Press the TIMER
7,0(5
button repeatedly until the time display
clears.
Note:
Holding the
/ buttondownwillrapidlycyclethe
time.Afterreplacingbatteriesorapowerfailureoccurs,the
timesettingwillneedtobereset.
According to the Time setting sequence of TIMER ON or
TIMEROFF,eitherStart-StoporStop-Startcanbeachieved.
12
EXTRA FUNCTION Button
Function:
A) Fan Mode - Is indicated by the
icon.Onlythefanwill
operateinthismode.Seesection8“FANButton”for
changing the fan settings.
B) Intelligent upward airow, C) Intelligent downward airow,
D) Reset intelligent airow position
1. Press the ON/OFF button on the remote control to turn
the unit on.
Select the desired operating mode.
2. Settingtheintelligentairowfunction
Press the EXTRA FUNCTION
(;75$
)81&7,21
button to enter ad-
ditional options. Press this button repeatedly to access
thelouversettings.Thelouvericonwillcyclethroughthe
followingthreesettings.
Healthy
airflow
upward
Healthy
airflow
downward
Present
position
Selectthedesiredposition,thenpresstheCONFIRM/
CANCEL
&21),50
&$1&(/
button to set the function.
3.Cancelingtheintelligentairowfunction
Press the EXTRA FUNCTION
(;75$
)81&7,21
button to enter addi-
tional options. Press this button repeatedly to access the
louversettings.Cyclethebuttontothelouvericon“pres-
ent”position,thenpresstheCONFIRM/CANCEL
&21),50
&$1&(/
button to cancel the function.
Notice:Donotrepositionthehorizontallouverbyhand.
This may cause the louver to run incorrectly and not
match the icon displayed on the remote control. If the
louverisnotrunningcorrectly,turntheunitoforone
minute,thenbackon,andadjustthelouversettingwith
the remote control.

Haier HSU09VHGDB-W Specifications

General

Brand	Haier
Model	HSU09VHGDB-W
Category	Air Conditioner
Language	English