Haier WS49GDB User Manual

SERVICE MANUAL
Model: WS49GDB
30
Issue 2014-12-10
Rev.
FZ1412S025V3
Error code Part Fault Rrepair
EE Temperature sen
s
Temperature sensor failure
(short circuit or open circuit)
1 Check the point of sensor,
and move it to original place.
2. Change the temperature
controller.
3. Put the wine cellar to suitable
place and make air circulate
well.
4.Remove frost regularly.
5. Check or supplement
refrigerant.
6. Change compressor.
7. Change new drying filter.
LL Compressor
The actual temperature of
the temperature sensor is less
than -5
1. Check the point of sensor,
and move it to original place.
2. Adjust to suitable position,
normally contact tightly with
evaporator cover.
3. Change compressor.
HH Compressor
The actual temperature of the
sensor is more than 50.
1 Check the point of sensor,
and move it to original place.
2. Change the temperature
controller.
3. Put the wine cellar to suitable
place and make air circulate
well.
4.Remove frost regularly.
5. Check or supplement
refrigerant.
6. Change compressor.
7. Change new drying filter.
F1 Temperature sen
s
Not refrigeration in the box
1.Vacuum pumping and Filling
refrigerant
2.Check the fan is ok or change
the compressor or
accessories of compressor
make air circulate well.
4.Remove frost regularly.
5. Check or supplement
refrigerant.
6. Change compressor.
7. Change new drying filter.

Haier WS49GDB Specifications

General

Door hinge	Right
Inner color	-
Housing color	Black
Shelves material	Wood
Number of shelves	9 shelves
Appliance placement	Freestanding
Number of compressors	1
Filtering	Yes
Noise level	42 dB
Bottles capacity	49 bottle(s)
Temperature range (zone 1)	- °C
AC input voltage	220-240 V
AC input frequency	50 Hz
Annual energy consumption	190 kWh
Package depth	610 mm
Package width	568 mm
Package height	1340 mm
Package weight	62000 g

Weight and Dimensions

Depth	540 mm
Width	500 mm
Height	1270 mm
Weight	58000 g