Harman Kardon AVR 140 Quick Start Guide

Thank you for purchasing a Harman Kardon
®
AVR 140.This Quick-Start
Guide will help you with a basic system installation. For detailed information
on any step in this Guide,please refer to the pages referenced in the
Owner’s Manual.We strongly recommend that you read the Owner’s
Manual for complete details on how to install, configure and operate the
AVR 140, as well as for the important safety information it contains.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the back
of the AVR 140 (see page 7).
FRONT
LEFT
SPEAKER

(White)
SURROUND 
BACK SPEAKER
(Brown)
CENTER
SPEAKER
(Green)
SUBWOOFER
(Purple)
SURROUND
LEFT
SPEAKER

(Blue)
FRONT
RIGHT
SPEAKER

(Red)
SURROUND
RIGHT
SPEAKER

(Gray)
Step 1.
Place your speakers in the listening room
(see pages 14–15).
SPEAKER PLACEMENT
AVR 140 QUICK-START GUIDE
Connections Color Guide
Audio Connections Left Right
Front
Center
Surround
Subwoofer
Surround Back
Digital Audio Connections
Coax
Optical
Video Connections
Composite
S-Video
Match the colored jacks on the AVR 140 to the appropriate
jacks on your source equipment or speakers.The colors are
standardized, but not all equipment or connectors use them.
AVR 140 Quick Start Guide 3/24/06 10:57 AM Page 1

Harman Kardon AVR 140 Specifications

General

Brand	Harman Kardon
Model	AVR 140
Category	Receiver
Language	English