Harman Kardon AVR 1510 Service Manual

Harman Kardon Service Manual
AVR 151/230
75W 5.1 CHANNEL A/V RECEIVER
Released EU2013 Harman Consumer Group, Inc. Rev 0, 05/2013
8500 Balboa Boulevard
Northridge, California 91329
CONTENTS
EXPLODED VIEW AND PARTS 14
PARTS LIST 15
BIAS ADJUSTMENT 39
SEMICONDUCTOR PINOUTS 40
PCB DRAWINGS 108
BLOCK DIAGRAMS 118
WIRING DIAGRAM 120
SCHEMATIC DIAGRAMS 121
FRONT PANEL CONTROLS 3
REAR PANEL CONNECTORS 5
REMOTE CONTROL FUNCTIONS 7
PROCESSOR RESET 9
TROUBLESHOOTING 10
SPECIFICATIONS 11
PACKAGE DRAWING 12
DISASSEMBLY 13

Harman Kardon AVR 1510 Specifications

Audio Specifications

stereo power	75W per channel, two channels driven @ 6/8 ohms, 1kHz, <0.1% THD
multichannel power	75W per channel, two channels driven @ 6/8 ohms, 1kHz, <0.1% THD
input sensitivity/impedance	250mV/27k ohms
signal-to-noise ratio (IHF-A)	75dB
frequency response (@ 1W)	10Hz – 130kHz (+0dB/–3dB)
high instantaneous current capability (HCC)	±25 amps
slew rate	40V/sec

FM Tuner Specifications

frequency range	87.5MHz – 108.0MHz
usable sensitivity IHF	1.3µV/13.2dBf
signal-to-noise ratio (mono/stereo)	70dB/68dB
distortion (mono/stereo)	0.2%/0.3%
stereo separation	40dB @ 1kHz
selectivity (±400kHz)	70dB

AM Tuner Specifications

frequency range	520kHz – 1, 510kHz
signal-to-noise ratio	38dB
usable sensitivity (loop)	375µV
distortion (1kHz, 50% mod)	1.0%
selectivity (±10kHz)	30dB

Video Specifications

television format	NTSC
input level/impedance	1Vp-p/75 ohms
output level/impedance	1Vp-p/75 ohms
video frequency response (composite video)	10Hz – 8MHz (–3dB)
HDMI	Supports up to 4K x 2K

General Specifications

power requirement	120V AC / 60Hz
power consumption	<0.5W (standby); 410W maximum
dimensions (H x W x D)	4-3/4" x 17-5/16" x 11-13/16" (121mm x 440mm x 300mm)
weight	10 lb (4.6kg)