Harman Kardon AVR 1510 Service Manual

AVR 151, 5.1CH RECEIVER, bill of materials
Level Ref# Component Description Drawing No REQ-Qty
...3 WF1501
CWC4C4A27B150B10
CARD , CABLE (27p,1.25mm Pitch, 150mm) 1
...3 WF1502
CWC4C4A17B120B10
CABLE , CARD(17P, 120MM, 1.25MM) 1
.1 CHE154 CLAMPER , ARM 0.12
.1 CPB1A013X BAG, POLY 1
.1 CPG1A972W BOX , OUT CARTON AVR151 1
.1 CPL18A5M STAPLE 8
.1 CPS1A930 PAD , LEFT 1
.1 CPS1A931 PAD , RIGHT 1
.1 CQB1A907Z LABEL , BAR CODE AVR154 1
.1 CQB1A978 LABEL , BAR CODE(SET) 1
.1 CQS1A001 RIBON , BAR CODE SONY(TR-4070) 0.12
.1
CQXAVR151/230
INSTRUCTION MANUAL ASS'Y 1
..2 CABR03PPB BATTERY , AAA 2PCS IN PACK 00D3940012003 2
..2
CARTAVR151-HK
REMOTE CONTROLLER (AVR151) 1
..2 CJA2B120Z CORD , POWER (PLUG+SOCKET) EUR 1
..2 CPB1A190Z BAG , POLY(MANUAL260X365) 1
..2 CPL0905 STAPLE 3
..2 CQB1A971 LABEL , BAR CODE(MANUAL) 1
..2 CQE1A570Z SHEET , QUICK START GUIDE AVR1510 1
..2 CSA1A018Z FM 1 POLE ANT T15011F-1 1
..2 CSA1A039Z ANT, AM LOOP(9.5uH/5T) 1
.1 CRE1A037 LOCKER SH08M790BO 4
.1 C4FC240CL TAPE , P.P(24mm*50mm) 0.2
.1 C4FC500CL TAPE , OPP 2.3
Harman Kardon
AVR 151 Service Manual
Page 38 of 131

Harman Kardon AVR 1510 Specifications

Audio Specifications

stereo power	75W per channel, two channels driven @ 6/8 ohms, 1kHz, <0.1% THD
multichannel power	75W per channel, two channels driven @ 6/8 ohms, 1kHz, <0.1% THD
input sensitivity/impedance	250mV/27k ohms
signal-to-noise ratio (IHF-A)	75dB
frequency response (@ 1W)	10Hz – 130kHz (+0dB/–3dB)
high instantaneous current capability (HCC)	±25 amps
slew rate	40V/sec

FM Tuner Specifications

frequency range	87.5MHz – 108.0MHz
usable sensitivity IHF	1.3µV/13.2dBf
signal-to-noise ratio (mono/stereo)	70dB/68dB
distortion (mono/stereo)	0.2%/0.3%
stereo separation	40dB @ 1kHz
selectivity (±400kHz)	70dB

AM Tuner Specifications

frequency range	520kHz – 1, 510kHz
signal-to-noise ratio	38dB
usable sensitivity (loop)	375µV
distortion (1kHz, 50% mod)	1.0%
selectivity (±10kHz)	30dB

Video Specifications

television format	NTSC
input level/impedance	1Vp-p/75 ohms
output level/impedance	1Vp-p/75 ohms
video frequency response (composite video)	10Hz – 8MHz (–3dB)
HDMI	Supports up to 4K x 2K

General Specifications

power requirement	120V AC / 60Hz
power consumption	<0.5W (standby); 410W maximum
dimensions (H x W x D)	4-3/4" x 17-5/16" x 11-13/16" (121mm x 440mm x 300mm)
weight	10 lb (4.6kg)