DVD PLAYER
VCR (Video 1)
I
n/Rec
Out/Play
L
R VIDEO
Component Video
Y
Pb
Pr
Optical Coax
L R Video S-Video
Cable Box or Satellite Receiver (Video 3)
OUT
L
R Video S-Video
O
ptical Coax
C
omponent Video
Y
Pb
P
r
TV or Video Display
IN
V
ideo S-Video Component Video
Y
Pb Pr
VIDEO CONNECTIONS
Device Connection Options: Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4, Coaxial 4 and Optical 4 inputs are on the front panel of the receiver.
Device Input Name Audio Input Connections Audio Output Connections Video Connections
CD Player CD CD L/R Inputs, Optical Digital 1, 2 or 3, or Coaxial Digital 1, 2 or 3 Not required Not required
DVD Player DVD Coaxial Digital 1, 2 or 3, Optical Digital 1, 2 or 3, or DVD L/R Inputs Not required DVD Component Video Input, DVD Composite or S-Video
VCR Video 1 Video 1 L/R Inputs Video 1 L/R Outputs Video 1 Composite or S-Video Input and Output
Cable Box or Satellite Receiver Video 3
Video 3 L/R Inputs, Optical Digital 1, 2 or 3*, or Coaxial Digital 1, 2 or 3* Inputs
Not required Component V2, Video 3 Composite or S-Video
Audio Recorder Tape Tape L/R Inputs, Optical Digital 1, 2 or 3, or Coaxial Digital 1, 2 or 3 Inputs Tape L/R Outputs, Digital Optical** or Coaxial Outputs** Not required
TV or Video Display Not applicable Not required Not required Monitor-Out Component, Composite and/or S-Video.
*
Check with your cable company to deter
mine whether digital audio is available for all channels
.
It may be necessar
y to make BOTH analog and digital connections if it is not.
**
Digital audio recorders only
.
250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com ©2004 Harman International Industries, Incorporated Part No. ZKD1216HA00-5
Power for the Digital Revolution
.
®
®
Figure 6 – Video Connections
Dashed lines (––––) indicate coaxial and optical digital audio connections. Choose either type (but not both) for each
digital audio source.
Dotted lines (
••••) indicate component, composite or S-Video connections. Component video is the preferred connection
when available, but you may use any of the three types (but not more than one). When component, composite and
S-Video sources are connected to the AVR you must also connect all outputs from the AVR to your TV.
To Previous Page
Loading...
Need help?
General
