Harman JBL PULSE User Manual

To reset the unit to factory setting:
1. Power on the unit by pressing the "Power Key".
2. Press the "Vol - " key and the "Mode" key together for more than 5 seconds.
3. The unit will display Red, Green, Blue light and goes into power off stage.
The unit is reset to factory setting.
JBL
PULSE Service Manual
Page 36 of 38
JBL PULSE RESET TO FACTORY SETTINGS

Harman JBL PULSE Specifications

General

Brand	Harman
Model	JBL PULSE
Category	Speakers
Language	English