Harman Soundcraft Ui12 User Manual

3.3: TABLET SCREENS
SOFTWARE > TABLET SOFTWARE SCREENS
3.3: TABLET SOFTWARE SCREENS
Ui12, Ui16 User Manual
AUX SENDS
AUX SENDS is where the aux mixes are
created. The faders determine the level of
signal sent to the selected aux bus. Select
an aux mix from those available at the
top of the view to adjust that mix. The Aux
Master will be available on the right hand
end of the screen, next to the Master
Channel.
EDIT
The EDIT page provides access to audio
processing such as EQ, DYNAMICS, and
FX. The specic audio processing tabs
available depend on the selected channel
type. For example, the aux outputs and
Master Channel include Graphic EQ.
FX SENDS
FX Send faders determine the mix that is
sent to the selected FX processor. First,
select which effect you wish to adjust
using the tabs, then adjust the faders
to increase or decrease the amount of
reverb you would like added to each input
channel.
Select EDIT to edit the selected FX
algorithm.
MORE ME
MORE ME allows users to assign their
own personal channel, and create a
personal monitoring mix with a single
large fader. MORE ME channel names
are highlighted in orange. To assign an
input channel to the More Me fader,
long-press a channel name and select the
ASSIGN ME function. Use the same
process to assign an Aux bus as ‘ME
OUT’. In Tablet software, select MORE
me in the Slideout panel, or turn the ipad
to a portrait view to access the MoreMe
screen.

Harman Soundcraft Ui12 Specifications

General

Brand	Harman
Model	Soundcraft Ui12
Category	Music Mixer
Language	English