EasyManuals Logo
Home>Harvia>Heater>Digital KIP

Harvia Digital KIP User Manual

Harvia Digital KIP
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Read this entire manual through to the end before proceeding with the installation.
KIPW HEATER INSTALLATION MANUAL
|
PAGE 2
HEATER INSTRUCTIONS
Your Almost Heaven Sauna is paired with a genuine Finnish heater manufactured by Harvia Oy, the world leader in sauna heaters.
Refer to this guide for installation and operation instructions. Please note, a licensed electrician should perform all electrical
work, and Almost Heaven Saunas sta is available to assist with any questions you or your electrician may have. Please call us at
888-355-3050 for technical assistance.
PERFORMANCE EXPECTATION
Based on its cubic footage, your sauna kit has been paired with an appropriately sized heater to achieve optimal sauna
temperatures. Properly installed, you should expect your KIP heater to consistently heat your sauna to at least 170 F at
approximately head height when sitting on the bench. This temperature should be achieved in 45-60 minutes, although this
timeframe can be longer depending on the ambient temperature outdoors.
Please note, saunas at elevations greater than 5,000’ above sea level may not perform as eciently as they would at sea level.
If you are above this threshold and are not achieving the aforementioned expectations, please contact Almost Heaven Saunas
technical support.
HEATER WARRANTY
Your Harvia heater comes with a 1 year warranty on the heating elements, and a 5 year warranty on the other components.
Information for your electrician:
4.5kW and 6.0kW KIP Heaters
• 30-ampdoublepolebreaker
• 240volts
• 1Phase
• 10/2wire.Ifthedistanceisgreaterthan90feetfromthepowersource,werecommendusingan8/2wireto
accommodate for voltage drop.
• DonotuseGFCIwiththisheater
• Usecopperwirewith90Cinsulation
8.0kW KIP Heaters
• 40-ampdoublepolebreaker
• 240volts
• 1Phase
• 8/2wire
• DonotuseGFCIwiththisheater
• Usecopperwirewith90Cinsulation

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Harvia Digital KIP and is the answer not in the manual?

Harvia Digital KIP Specifications

General IconGeneral
BrandHarvia
ModelDigital KIP
CategoryHeater
LanguageEnglish

Related product manuals