Maintenance 2L41C, 2M41, 2M41Z
82
HATZ
Operator’s Manual
Pos. Designation
1 Red field
2 Reset button
3 Hose
4 Air filter maintenance display
Ignition lock
0 Off
I Operation
II Start
Procedure
Step Activity
1 Remove the capsule hood and the side panel trim (see the
chapter 5 Engine design, page 26).
2 Turn the starting key to position I.
3 Pull the hose (3) off of the exhaust manifold.
Electrical air filter maintenance display
4 Generate a vacuum by sucking forcefully at the hose end.
The indicator (5) lights up.
5 If there is no reaction, check the following:
▪ Electrical part; cable connections, etc.
▪ Indicator
▪ Function of the maintenance switch.
Mechanical air filter maintenance display
4 Generate a vacuum by sucking forcefully at the hose end.
The red field (1) engages.
5 After the function test, unlock the red field (1) by pressing the re-
set button (2).
After the function test
6 Replace the faulty parts.
7 Reattach the hose (3) of the exhaust manifold.
8 Mount the capsule and air guide parts again.
To Next Page
Loading...
Need help?
General
