IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions should always be followed, including the following: Failure to follow
instructions can cause death and/or severe injury.
• READ AND FOLLOW ALL INSTRUCTIONS
• If your pool has a dedicated suction port (“vac port”) for vacuuming or for an automatic
pool cleaner, it must be covered when not in use. If not already installed, use a spring
loaded Safety Vac-Loc cover on the suction port to prevent entrapment and injury.
• If the cover provided does not t, purchase one that does from your local pool store and
install it instead. The cover should conform to IAPMO SPS4-99A.
• Always stop the pump before attempting to clean or service the pool vacuum.
• DO NOT use to remove large debris in new pools.
• REMOVE the cleaner before chemically shocking your pool.
• DO NOT allow swimmers in pool while pool cleaner is operating.
• Store the cleaner in a shaded safe area.
• Hoses must be stored straight. DO NOT coil the hoses.
• Keep away from children and pets.
• REMOVE cleaner when performing backwash.
SAVE THESE INSTRUCTIONS
1
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
To Next Page
Loading...
Need help?
General