Testing strip (it’s not provided in product package)
The washing effectiveness of your machine depends on the softness of the tap water. For this
reason, your machine is equipped with a system that reduces the hardness in mains water supply.
The washing effectiveness will increase when the system is correctly set. To find out the water
hardness level of water in your area, contact your local water distribuitor or determine water
hardness level by using a test strip(if available).
NOTE: Level is set 3 as default. If the water is well water or has a hardness level above 90 dF, we
recommend that you use filter and refinement devices.
Water Hardness Table
Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains water
supply. To find out the hardness level of your tap water, contact your water company or use the
test strip (have to be purchased separately, is not provided with the product).
Setting
In order to change the salt level, follow the below steps:
• Touch the programme button and hold it down.
• Turn on the machine.
• Hold down the Programme button until “SL” disappears.
• The machine will display the last setting.
• Set the level by touching the Programme button.
• Turn off the machine to save the setting.
WARNING: in case of moving, to configure the water hardness setting according to the water
hardness of the area you have moved is important for the effectiveness of washing.
Detergent usage
Only use detergents specifically designed for domestic dishwashers.
Add the recommended amount of detergent for the selected programme to ensure the best
performance.
To Next Page
Loading...
Need help?
General
