Testing strip (it’s not provided in product package)
NOTE: Level is set 3 as default. If the water is well water or has a hardness level above 90 dF, we
recommend that you use filter and refinement devices.
Water Hardness Table
Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains water
supply. To find out the hardness level of your tap water, contact your water company or use the
test strip (have to be purchased separately, is not provided with the product).
Setting
In order to change the salt level, follow the below steps:
• Press program button when the machine is off position.
• Turn on the machine by pressing On/Off button and continue to press program button at
least for 3”.
• If “Hardness set” is recognized all leds blink once.
• Release program button. The last setting level is viewed.
• Press program button to set the desired level.At any pressure of program button hardness
level is incremented. Hardness level 1 returns after hardness level 6.
• The last selected water hardness level is stored in the memory by cutting off energy of
the machine with On/Off button.
Detergent usage
Only use detergents specifically designed for domestic dishwashers. Keep your detergents in cool,
dry places out of reach of children.
Add the proper detergent for the selected program to ensure the best performance. The amount
of detergent needed depends on the cycle, load size, and soil level of dishes.
Do not fill detergent into the detergent compartment more than required; otherwise you can see
whitish streaks or bluish layers on glass and dishes and may cause glass corrosion. Continued use
of too much detergent may cause machine damage.
Using little detergent can result in poor cleaning and you can see whitish streaksin hard water.
See the detergent manufacturer’s instructions for a further information.
To Next Page
Loading...
Need help?
General
