Easily adjust the 3-way adjustable holder
to fit different-sized tablets.
Open the clamp by loosening the knob,
clip the clamp onto the stand, and place
the tightening cube in its slot to tighten
the knob.
Adjust the holder to your desired position.
Make sure to loosen the yellow ring
before adjusting the angle. Likewise,
always tighten the ring after adjusting.
Store the shim part at the arm of the
clamp when it’s not in use.
Insert the ball joint into the socket of
clamp, adaptor or suction cup.
Attach or remove the shim part to fit
different-sized tubes.
CAUTION
This suction cup is specially designed to
be used on nonporous flat and horizontal
surface only.
Please visit http://www.herculesstands.com to read the user manual in other languages.
TABLET HOLDER DG305B USER MANUAL
1
4
7
5
3
6
EZ Adaptor Suction Cup
Smart Clamp
2
Lock Lever
Lock Lever
8
Lock Lever
9
Lock Lever
To Next Page
Need help?
General
