HIKVISION 26 Series Quick Start Guide

Title:
How to configure 26 series Access Controller
to connect 485 Fingerprint Card Reader
Version:
v1.0
Date:
25/08/2022
Product:
Access Controller
Page:
1 of 5
1
Preparation
Type
Model
Version
Access Controller
DS-K2604
Face Recognition Terminal
DS-K1T680DFG1
Fingerprint Card Reader
DS-K1201MF
Magnetic Lock
DS-k4H250D
How to configure 26 series Access Controller to connect 485 Fingerprint
Card Reader
1. Wring
1) Dial the 485 Fingerprint Card Reader and enable the first digit of the DIP
Switch on the back of the 485 Fingerprint Card Reader.
2) Connect the 485 Fingerprint Card Reader, Face Recognition Terminal and
Magnetic Lock to the controller. Refer to the wiring diagram and physical
wiring diagram.

HIKVISION 26 Series Specifications

General

Brand	HIKVISION
Model	26 Series
Category	Card Reader
Language	English