HIKVISION Barrier gate User Manual

Barrier Gate User Manual
5
 Keep the device away from magnetic interference.
 Avoid device installation on vibratory surface or places, and avoid equipment installation on
vibratory surface or places subject to shock (ignorance may cause device damage).
 DO NOT touch the heat dissipation component to avoid burns.
 DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature
and humidity requirements, see device specification.
Maintenance
 If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
 If the device is abnormal, contact the store you purchased it or the nearest service center. DO
NOT disassemble or modify the device in any way (For the problems caused by unauthorized
modification or maintenance, the company shall not take any responsibility).
 Keep all wrappers after unpacking them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportation without the
original wrapper may result in damage to the device and the company shall not take any
responsibility.

HIKVISION Barrier gate Specifications

General

Brand	HIKVISION
Model	Barrier gate
Category	Automatic Barriers
Language	English