User Manual of HD-TVI Speed Dome
the size as the lens zooming in/out.
Steps:
1. Move the cursor to enter the privacy mask configuration submenu:
MAIN MENUS > DOME SETTINGS > PRIVACY MASK
PRIVACY MASK
MASK NO. 1
MASK STATUS OFF
SET MASK
DELETE MASK
BACK EXIT
Figure 3-8 Privacy Mask Configuration Menu
2. Choose the privacy mask number:
Steps:
(1) Move the cursor to MASK NO. and click IRIS+ to enter the editing mode.
(2) Click the up and down direction buttons to select a mask number for configuration.
(3) Click IRIS+ again to confirm and exit the editing mode.
The configurable privacy mask number varies according to the camera models.
3. Configure the position and size of the privacy mask.
Steps:
(1) Move the cursor to SET BLANK and click IRIS+ button to enter the editing mode as shown in
the following figure. You can see a privacy mask on the live window.
ADJUST MASK POS
FOCUS SHIFT STATUS
IRIS + SAVE
IRIS - CANCEL
Figure 3-9 Set the Privacy Mask
(2) You can see ADJUST MASK POS message on the screen. Click the direction buttons to adjust
the position of the privacy mask to the designed scene.
(3) Click FOCUS+ button, and you can see ADJUST MASK SIZE message on the screen. Click the