HIKVISION DS-2CD2432F-I Quick Operating Guide

Network Cube Camera·Quick Operation Guide
14
14
● The foam ring around the lens must be seated flush against the
inner surface of the bubble to isolate the lens from the IR LEDS.
Fasten the dome cover to camera body so that the foam ring
and the dome cover are attached seamlessly.
Steps:
Open the cover on the mounting base from the bracket. 1.
Open the Cover Figure 3-1
Drill the screw holes according to the drill template. 2.
Drill Template Figure 3-2

HIKVISION DS-2CD2432F-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2432F-I
Category	Security Camera
Language	English