Do you have a question about the HIKVISION DS-2CD2612F-I(S) and is the answer not in the manual?
Image Sensor | 1/3" Progressive Scan CMOS |
---|---|
Signal System | PAL/NTSC |
Minimum Illumination | 0.01 Lux @(F1.2, AGC ON), 0 Lux with IR |
Lens Mount | M12 |
Wide Dynamic Range | Digital WDR |
Digital noise reduction | 3D DNR |
Audio Compression | G.711 / G.726 |
Security | User authentication, Watermark |
Ingress Protection | IP66 |
IR Range | Up to 30 m |
Max Resolution | 1920x1080 |
Effective Pixels | 2.07 MP |
Shutter time | 1/100000 s |
Lens | 2.8 mm / 4 mm / 6 mm |
Day & Night | IR Cut Filter |
Video Compression | H.264 |
Frame Rate | 30 fps @ 1920 × 1080 |
Image Settings | Saturation, Brightness, Contrast adjustable by client software or web browser |
Network Storage | NAS |
Alarm Trigger | Motion detection, Network disconnection, IP address conflict |
Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, SNMP, IGMP |
Network Interface | RJ45 (10/100Base-T) |
Operating Conditions | -30 °C to 60 °C; Humidity 95% or less |
Power Supply | DC 12V ± 25%, PoE (802.3af) |