HIKVISION DS-2CD2612F-I(S) User Manual

Network Camera·Quick Guide
6
6 6
 Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between -30°C ~ 60°C), dusty or damp environment,
and do not expose it to high electromagnetic radiation.
 To avoid heat accumulation, good ventilation is required for a proper operating
environment.
 Keep out of water and any liquid.
 While shipping, the camera should be packed in its original packing.
 Improper use or replacement of the battery may result in hazard of explosion.
Please use the manufacturer recommended battery type.

HIKVISION DS-2CD2612F-I(S) Specifications

General

Image Sensor	1/3" Progressive Scan CMOS
Signal System	PAL/NTSC
Minimum Illumination	0.01 Lux @(F1.2, AGC ON), 0 Lux with IR
Lens Mount	M12
Wide Dynamic Range	Digital WDR
Digital noise reduction	3D DNR
Audio Compression	G.711 / G.726
Security	User authentication, Watermark
Ingress Protection	IP66
IR Range	Up to 30 m
Max Resolution	1920x1080
Effective Pixels	2.07 MP
Shutter time	1/100000 s
Lens	2.8 mm / 4 mm / 6 mm
Day & Night	IR Cut Filter
Video Compression	H.264
Frame Rate	30 fps @ 1920 × 1080
Image Settings	Saturation, Brightness, Contrast adjustable by client software or web browser
Network Storage	NAS
Alarm Trigger	Motion detection, Network disconnection, IP address conflict
Protocols	TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, SNMP, IGMP
Network Interface	RJ45 (10/100Base-T)
Operating Conditions	-30 °C to 60 °C; Humidity 95% or less
Power Supply	DC 12V ± 25%, PoE (802.3af)