HIKVISION DS-2CD4012F-A User Manual

Network Box Camera·Quick Operation Guide
21
21
 Use PCNVR software and to list the online devices. Please refer
to the user manual of PCNVR client software for detailed
information.
2. Change the IP address and subnet mask to the same subnet as of
your PC.
Refer to the following introductions to set IP address with SADP
software:
 Search active devices online
Search online devices automatically:
After launch the SADP software, it automatically searches the
online devices every 15 seconds from the subnet where your
computer locates. It displays the total number and
information of the searched devices in the Online Devices
interface. Device information including the device type, IP
address, port number, gateway, etc. will be displayed.

HIKVISION DS-2CD4012F-A Specifications

General

Image Sensor	1/3" progressive scan CMOS
Max Resolution	1280 × 960
Video Compression	H.264/MJPEG
Audio	Two-way audio
Ingress Protection	IP66
Wide Dynamic Range	Digital WDR
Operating Conditions	Indoor/Outdoor
Minimum Illumination	0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR
Lens Type	Fixed
IP Rating	IP66
Lens	4 mm
Power Supply	12 VDC ± 25%
Frame Rate	30 fps at 1280 × 960
Angle of View	Horizontal: 89°, Vertical: 46°, Diagonal: 107°
Day & Night	ICR
Network Storage	NAS (Support NFS, SMB/CIFS)
Day/Night	IR cut filter with auto switch
Operating Temperature	-30 °C to +60 °C (-22 °F to +140 °F)
Power Consumption	Max. 5.5W
Weight	0.5 kg

Summary

About This Document

Regulatory Information

FCC Information and Conditions

Details FCC compliance, rules, and conditions for the device's operation.

EU Conformity Statement

Confirms compliance with EU directives for safety and EMC standards.

Safety Instruction

Warning and Caution Definitions

Explains the distinction between warnings and cautions for user safety and equipment protection.

Appearance Description

Installation

Installation Preparations

Important checks and considerations before beginning the installation process.

Ceiling Mounting Guide

Provides detailed steps for installing the camera on a ceiling mount.

Wall Mounting Guide

Provides detailed steps for installing the camera on a wall mount.

SD Card Installation

Instructions on how to insert and remove the SD card from the camera.

Setting the Network Camera over the LAN

IP Address Configuration via SADP

Guides on using SADP software to detect and set the camera's IP address on the LAN.

Modifying Device Network Parameters

Steps to edit network parameters like IP address and port using the SADP interface.

Accessing via Web Browser

Web Browser System Requirements

Lists the necessary operating system, CPU, RAM, display, and web browser versions.

Web Login and Plug-in Setup

Steps to log in via web browser and install the required plug-in for viewing.