EasyManuals Logo
Home>HIKVISION>Card Reader>DS-K1102M

HIKVISION DS-K1102M Manual

HIKVISION DS-K1102M
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background image
Title:
DS-K1100 Series Card Readers Connect
to DS-K2600 Series Access Controllers
by RS-485
Version:
v1.0
Date:
6/21/2017
Product:
Access Control Device
Page:
1 of 4
DS-K1100 Series Card Readers Connect to DS-K2600
Series Access Controllers by RS-485
Preparation
Connect card reader to access controller is mainly applied to swiping card to open the door for entrring or
exiting. The models of card reader and access controller in this guide are as below:
Card Reader
Access Controller
DS-K1101M/MK, DS-K1102M/MK,
DS-K1103M/MK, DS-K1104M/MK,
DS-K1107M/MK, DS-K1108M/MK
DS-K2601,
DS-K2602,
DS-K2604
DS-K1102E/EK, DS-K1107E/EK,
DS-K1108E/EK
Notice
1. Please cut off power supply before wiring;
2. DS-K1100 Series Card Readers support private RS485 protocol; the details about RS-485 about of
card reader are as below:
Description
Power (DC +12V)
GND
RS-485+
RS-485-
W0 (available for Wiegand Protocol)
W1 (available for Wiegand Protocol)
Beep Control (available for Wiegand Protocol)
Blue/Green LED Control (available for Wiegand Protocol)
Red LED Control (available for Wiegand Protocol)
Tamper (available for Wiegand Protocol)
3. Correspondingly, there are RS485 interfaces in DS-K2600 series access controllers; you can find RS-
485 interface at the same position in DS-K2601/02/04 access controllers, as pictures show:

Other manuals for HIKVISION DS-K1102M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1102M and is the answer not in the manual?

HIKVISION DS-K1102M Specifications

General IconGeneral
InternalNo
CertificationIP64 CE, FCC
Product colorBlack
LED indicatorsPower, Status
Housing materialAcrylonitrile butadiene styrene (ABS)
Compatible memory cards-
Input voltage12 V
Output current500 mA
Power source typeDC
Power consumption (max)2 W
Operating temperature (T-T)-20 - 65 °C
Operating relative humidity (H-H)10 - 90 %
InterfaceRS485 / Wiegand
Supported protocolsMifare
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity0
Built-in processorYes
International Protection (IP) codeIP64
Frequency13.56 MHz
Maximum read range50 mm
Weight and Dimensions IconWeight and Dimensions
Depth121 mm
Width86.5 mm
Height14 mm
Weight140 g

Related product manuals