EasyManuals Logo
Home>HIKVISION>Touch terminals>DS-K5032-D

HIKVISION DS-K5032-D Quick Start Guide

HIKVISION DS-K5032-D
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DS-K5032 Series Visitor Terminal
Quick Start Guide
UD20583B-A
270 mm
291 mm
185.4 mm
Operator Screen
Power Switch
Reserved Reserved USB2.0
USB2.0
10 Lux
>1200 Lux
100~850 Lux
Hold:
Power On/Power Off/Reboot
Press:
Sleep/Wake Up
1
Appearance
Supplement Light Supplement LightCamera
Visitor Screen
Bottom Camera
Card Presenting Area
Indicator for
Card Presenting
The pictures here are for reference only.
Network
Interface
Power
Interface
Connect to
Network
Connect to
Power
Supply
Avoid backlight, direct sunlight, and indirect
sunlight.
For better recognition, there should be light
source in or near the installation environment.
Installation Environment:
Steps:
1. Put the device on the surface.
This equipment is suitable for mounting on
concrete or other non-combustible surface
only.
2. Plug the power supply in the power interface.
3. Press the power switch to power on the device.
The device will enter the main page after
powering on.
If required, you can connect the device with the
network.
3 Installation
Close to Light
Indirect Sunlight
through Window
Direct Sunlight
through Window
Direct Sunlight
Back Light
2
Wiring
Reserved
Reserved
Reserved
Reserved
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://
www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE
TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR
OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT
TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-
ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT
IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS
PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision
devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is
stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible
to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection
laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as,
implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the
effectiveness of your security controls.
Scan the QR code to get the user manual for detailed information.
Note that mobile data charges may apply if Wi-Fi is unavailable.
Connect to
Peripheral
Device
Connect to
Peripheral
Device
Single-screen models support self-service
operations for visitors only;
Dual-screen models support visitor screen
and operator screen for staff operations.

Other manuals for HIKVISION DS-K5032-D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K5032-D and is the answer not in the manual?

HIKVISION DS-K5032-D Specifications

General IconGeneral
BrandHIKVISION
ModelDS-K5032-D
CategoryTouch terminals
LanguageEnglish

Related product manuals