HIKVISION HWT-B123-M How-To

www.hi-watch.eu
2. Check the device. Enable DHCP. Entering the password. Click Modify.
3. Activate all the other devices and enable DHCP by the same method.
Key Step 3 3. Go to the NVR’s website and add IPC.
Steps:
1. Open IE Browser and input NVR’S website address: (http:// + IP address), for example: http://192.168.1.32, if
you use IE Brower as default, you can double click the IP address that has shown on SADP software.
2. If it is first time using Hikvision HiWatch Series product, please install the plug-in.
3. Enable the plug-in and enter the webpage of the NVR again.
4. Input the user, password and click Login.
5. Go to Configuration-System-Camera Management to add the camera.

HIKVISION HWT-B123-M Specifications

General

Brand	HIKVISION
Model	HWT-B123-M
Category	Security Camera
Language	English