HIKVISION iDS-TCV907-BIR - Page 54

Figure 8-1 Set Email
3.
Set email parameters.
1) Enter the sender's email informaon, including Sender, Sender's Address, SMTP Server, and
SMTP Port.
2) Select Email
Encrypon.
None
Emails are sent without
encrypon.
TLS
Emails are sent aer being encrypted by TLS.
3) Oponal: If you want to upload no-plate data, check Upload No-Plate Data.
4)
Oponal: If your email server requires authencaon, check Authencaon and enter your
user name and password to log in to the server.
5) Enter the receiver's informaon, including the receiver's name and address.
6)
Oponal: Click Test to see if the funcon is well congured.
4.
Click Save.
Network Trac Camera Operaon Manual
44