Hisense HS312 Quick Start Guide

Quick Start Guide
3.1CH Soundbar with wireless subwoofer &
Dolby Atmos
Model: HS312
1
2
Remote control
What’s in the Box
Main Unit
Remote Control /
AAA Batteries x 2
Wireless Subwoofer
AC Power Cord x2
1 Switch the unit between ON and
STANDBY mode.
2 (MUTE) Mute or resume the sound.
3 SOURCE Select the play function.
4 (BT) Select the Bluetooth mode.
5 VOL+/VOL- Increase/decrease the volume level.
6 / Skip to previous/next track in
Bluetooth/USB mode.
7 /PAIR Play/pause/resume playback in
Bluetooth/USB mode.
Press and hold to activate the
pairing function in Bluetooth mode
or disconnect the existing paired
Bluetooth device.
8 EQ Select a preset sound eect.
9 SURR Adjust the surround ON/OFF.
10 DIMMER+/- Adjust display brightness.
11 BASS Press to activate the bass setup.
12 TREBLE Press to activate the treble setup.
Replace the Remote Control Battery
1 Press and slide the back cover to
open the battery compartment of
the remote control.
2 Insert two AAA size batteries
(included). Make sure the (+) and (–)
ends of the batteries match the (+)
and (–) ends indicated in the battery
compartment.
3 Close the battery compartment cover.
HDMI Cable
- Do not mix old and new batteries;
- Do not mix alkaline, standard (Carbon-Zinc) or
rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
Identifying the Parts












7
3 4 5
1 2 3
13
6
OPT
1 2
7 8 9 10 11 12
Identifying the Parts
Main Unit
1 Remote Control Sensor
Receive signal from the remote control.
2 Display Window
Show the current status.
3
(ON/OFF) button
Switch the unit between ON and Standby
mode.
4
(SOURCE) button
Select the play function.
5 VOL+/VOL- buttons
Increase/decrease the volume level.
6 Screws
Remove the screws then install the wall
mounting screws into the back of the unit.
7 USB Socket
Insert the USB device to play music.
8 LINE IN Socket
Connect to an external audio device.
9 OPTICAL Socket
10 COAXIAL Socket
11 HDMI OUT (ARC) Socket
Connect to a TV via HDMI cable.
12 HDMI IN 1 / HDMI IN 2 Sockets
13 AC~ Socket
Connect to the power supply.
Wireless Subwoofer
1 AC~ Socket
Connect to power.
2 PAIR button
Press activate the pairing function between
the main unit and the subwoofer.
3 PAIR Indicator
Light stops blinking once the Subwoofer is
paired with the Soundbar.
EN
Wall Mounting Screws (x2) / Brackets (x2) /
Bracket Screw (x2) / Wall Anchors (x2)
User Manual/Quick Start Guide/
Wall Mount Guide
Optical Cable

Hisense HS312 Specifications

General

Audio decoders	Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD
RMS rated power	300 W
Audio output channels	3.1 channels
Subwoofer type	Active subwoofer
Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Subwoofer frequency range	40 - 120 Hz
Wi-Fi	No
HDMI in	2
HDMI ports quantity	3
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Product color	Black
Number of speakers	6
Soundbar speaker RMS power	180 W
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Soundbar power consumption	20 W
Power consumption (standby)	0.5 W
Subwoofer power consumption	30 W
Cables included	AC, HDMI
Package depth	270 mm
Package width	1090 mm
Package height	365 mm
Package weight	10600 g

Weight and Dimensions

Depth	90 mm
Width	980 mm
Height	58 mm
Subwoofer depth	420 mm
Subwoofer width	240 mm