Hisense RD-44WC series User Manual

9
Compressor Protector test ——
Use a multi-meter to test the resistance between the two end as the pic show :
If there show 000 or almost 0 then it is OK.
If there is no response then it is broken.
Compressor PTC starter test ——
Use a multi-meter to test the resistance between the two end as the pic show :
If there show the number is between About 9-25Ω then it is OK.
If there show 000 or no response then it is broken.

Hisense RD-44WC series Specifications

General

Brand	Hisense
Model	RD-44WC series
Category	Refrigerator
Language	English